The SLM6/3 is used to sterilize the airless area of tanks or containers and to sterilize intake air. The SLM6/3 is used to guide air through three filter stages (G4, F7, H13) for treatment and filtration. Then the air is sterilized by the UV-C module, after which it is blown into the existing tank.
Filtering and UV-C disinfection are combined into just one device, allowing for the reliable elimination of dust particles, suspended and polluting materials and microorganisms ; dry, heat-free and chemical-free disinfection
Applications: Ventilation systems | Ventilation ducts | Airless areas of tanks/containers
Equipment: Module contains three filter stages (G4, F7, H13) and the UV-C module; UV-C emitters are waterproof with a protective glass; switch cabinet contains operating hours counter and remote signaling contact for functional monitoring.
Assembly/maintenance: The module is mounted upstream of the suction channel; maintenance can easily be performed on the filter and emitter from the outside
The SLM6/3 is used to sterilize the airless area of tanks or containers and to sterilize intake air. The SLM6/3 is used to guide air through three filter stages (G4, F7, H13) for treatment and filtration. Then the air is sterilized by the UV-C module, after which it is blown into the existing tank.
Filtering and UV-C disinfection are combined into just one device, allowing for the reliable elimination of dust particles, suspended and polluting materials and microorganisms ; dry, heat-free and chemical-free disinfection
Applications: Ventilation systems | Ventilation ducts | Airless areas of tanks/containers
Equipment: Module contains three filter stages (G4, F7, H13) and the UV-C module; UV-C emitters are waterproof with a protective glass; switch cabinet contains operating hours counter and remote signaling contact for functional monitoring.
Assembly/maintenance: The module is mounted upstream of the suction channel; maintenance can easily be performed on the filter and emitter from the outside
| Type |
SLM6/3 |
|---|---|
| Dimensions in mm L x W x H |
1830mm × 713mm × 435mm |
| Housing material |
Galvanized steel or stainless steel |
| Emitter ST1 |
UV-C high efficiency / 16.000 h |
| Power in W |
300 W |
| Voltage |
230V ± 10% (50 – 60Hz) |
| Connection cable in m |
3m / 6m / 10m |
| Weight in kg |
70 kg |
| Protection class |
IP 68 |
| Filter stage 1 |
Filter class G4 as per EN779:2012 |
|
Average degree of separation (Am) of the synthetic test dust (%) G4: 90 ≤ Am |
|
| Filter stage 2 |
Filter class F9 as per EN 779:2012 |
|
Minimum effectiveness at 0.4 μm F9 70%, mean effectiveness (Em) of 0.4 μm 95 ≤ Em |
|
| Filter stage 3 |
Filter class H13 as per EN 1822 aerosol filter |
